The story behind the MAONOCASTER AME2 Podcast Mixer:
After shipping over 200,000 units of Maonocaster Lite to over 50 markets around the world, we are now launching the successor MaonoCaster AME2 series podcast console. It is an all-new product with a brand new design, substantial performance improvements, and new features. We also improved user experiences and fixed glitches based on valuable customer feedback.
MaonoCaster AME2 kept every feature that our users loved and we have also added XLR microphone support on top of it. It has built-in phantom power and premium microphone amps with a gain switch. You can use any of your favorite XLR condenser or dynamic microphone and record ultra-clear sound with it.
MaonoCaster AME2 podcast interface specially designed 3-level microphone gain adjustment and 48V phantom power for best performance of more microphone. We kindly suggest that you read the following notes before use.
1. Please confirm your microphone type and sensitivity
If you connect to your own microphone, please refer to the user manual of the microphone to confirm the microphone type and sensitivity.
2. Please confirm if your microphone needs to turn on the 48V phantom power
XLR-connected condenser mics require phantom power, dynamic mics do not.
3. Please adjust the 'MIC1 SETTING' on the side of the audio interface to the correct position.
40dB: condenser mic sensitivity higher than -40dB, like MAONO microphone PM320/PM500/AT2020
50dB: dynamic mic sensitivity between -50dB and -55dB, like Samson Q2U/HD300T
60dB: dynamic mic sensitivity between -55dB and -60dB, like Well-known models SM7B/SM58/MV7
Up to 8H working time after fully charged
2000mAh battery allows you to use it freely when traveling , and can satisfy your use in more scenarios
Clearer sound transmission
Separate USB C jack to connect your computer, keep away from static noise
Adjust the volume of every microphone freely
Each Mic, Soundpads, Monitor, Input, and Output Volume can be adjusted individually to enjoy your podcast.
Intelligent noise reduction
reduces background noises, you will get clean, distortion-free audio with a natural, warm sound.
Switch to dry mode to bypass all audio processing and record a pure microphone signal.
Use with your favorite mic
Drive the high-end dynamic microphones, XLR condenser mic, and 3.5MM condenser mic for ultra-clear sound.
|Headset Output Power||20mW, 32Ω (1kHz, THD+N=1%)|
|Sample Rate||48kHz /16bit|
|Wireless Connection||Bluetooth 4.2|
|Charge Time||Appr. 3h|
|Battery Life||Appr. 8h (Highest keypads brightness)|
• Please check if the podcast console has power, please charge it, and then turn it on.
•You need to long-press the for more than three seconds to turn it on.
Press the A/B/C button to record a 1-minute audio effect, and press the Loop Button to repeat playing an audio effect. Press the other 8 buttons to record the 20s(Max)audio effect.
•By default, there is no customized audio effect.
•Recording: with an audio card on, connect it to mic/external audio input device/Bluetooth devices, and long-press any custom button for more than 3 seconds. Release press until the indicator slowly blinks and enters recording mode. Short press the button again to stop recording or record until the indicator stops blinking, which indicates max time length audio is recorded.
•Note: Each custom audio effect button has limited storage, when there is no storage left, it will stop recording and the indicator will go off automatically.
•connect to the computer that is charging the device
•Use ordinary 5V 1A or 5V 2A size phone charging head
Please turn the recording knob to the appropriate range
•Powering on the sound card, the Bluetooth indicator will blink, Bluetooth search and
automatically pair with the paired mobile phone, then the indicator light turned to solid
•Long press the Bluetooth button for 2 seconds, the indicator will turn off and end pairing
•Powering on the sound card, Bluetooth indicator will blink, Bluetooth search and
automatically pair with paired mobile phone, then indicator light turned to solid
•Long press Bluetooth button for 2 seconds, indicator will turn off and end pairing
• Please use the USB cable in the package to connect to the USB-C port of the audio interface and the USB port of your computer.
• Please check the computer's sound settings after the connection is complete. Both the input and output are' Maonoaster E2 '(right-click the speaker on the right side of the desktop to open the sound settings)