After shipping over200,000 units of Maonocaster Lite to over 50markets around the world, we are now launching the successor MaonoCaster AME2 series podcast console, an all-new product with a brand new design, substantial performance improvements, and new feature, Driving the high-end dynamic microphones, XLR condenser mic, and 3.5MM condenser mic for ultra-clear sound.
Mic Gain Adjustment
Widely Compatiable with most xlr microphone on the market.
High Quality Sound
Build-in quality pre-amps, get the sound you need
Fine Turn Your Voice
You will find that your voice can be with more possibility.
Switch to dry mode to bypass all audio processing and record a pure microphone signal.
8 Hours Working Time
Up to 8H working time after fully charged can really satisfy your use in more scenrios.
|Headset Output Power||20mW, 32Ω (1kHz, THD+N=1%)|
|Sample Rate||48kHz /16bit|
|Wireless Connection||Bluetooth 4.2|
|Charge Time||Appr. 3h|
|Battery Life||Appr. 8h (Highest keypads brightness)|
1* audio interface, 1* metal pop filter, 1* USB A-C charging cable, 2* 3.5mm TRRS audio cable, 1* user manual. We provide a 12-Month warranty. For a better user experience, please download more instructions below and read the user manual before setting up.
Yes, AME2A is great for podcasting, please let me tell you the reasons. 1. There are 11 custom sound effect keys on AME2A, of which 3 sound pads support recording up to 60s sound effects and one-key loop, and the other 8 can record 20s sound effects. 2. Built-in high-quality preamp and supports phantom power to achieve
Of course, the AME2A has two monitoring headphone jacks on the side, which can satisfy two people for monitoring at the same time, so that the recording can be adjusted according to the recording effect at any time.C
This audio interface is suitable for your rode podmic microphone. You only need to adjust the Mic1 Setting to 60dB and turn off the '48V'button. The specific judgment method is as follows: 1. Please refer to the user manual of the microphone to confirm the microphone type and sensitivity. 2. Please confirm if your microphone needs to turn on the 48V phantom power XLR connected condenser mics require phantom power, dynamic mics do not. 3. Please adjust the 'MIC1 SETTING' on the side of the audio interface to the correct position. 40dB: condenser mic sensitivity higher than -40dB, like MAONO PM320/PM500/AT2020 5dB: dynamic mic sensitivity between -50dB and -55dB, like Samson Q2U/HD300T 60dB: dynamic mic sensitivity between -55dB and -60dB, like Shure SM7B/SM58/MV7
Yes, the Samson Q9u is an XLR dynamic microphone that you can connect to the AME2. AME2 has a sensitivity adjustment switch, so you can adjust the settings on the AME2 according to your microphone sensitivity, which can better match your microphone. An XLR condenser microphone is already included in the package, so when you purchase the AME2, you can start recording audio directly.
The AME2A may not work with Xbox One. If you want to connect musical instruments, computers, mobile phones, etc. to it, AME2A is compatible with these devices. If you want to know other details, we suggest you contact our customer support staff directly by email. Thank you.